In the design of the landscaping drainage project, the overall beauty of the greening should be considered, and these water supply and drainage facilities should also play an important role. Before the design, the garden designer should do a field trip and arrange the drainage grooves scientifically and reasonably according to the actual terrain, buildings and surrounding conditions, in order to achieve the best results.

Precast polymer concrete drain Ditch selection: General purpose, all the groove of the flat cover can be used.


In addition to the effective removal of surface water in the garden, the drainage of the finished product is economical and easy to maintain in the long run. After being decorated with stone, the landscape is still natural. Because the products are interlocked with each other, while ensuring the construction speed, there will be no other phenomenon like the other garden ditch.

In almost all of the finished trench applications in landscaping, there is one thing in common, that is, the load-bearing requirements are not high, but the surface water must be eliminated quickly and effectively. The overall use can be attributed to five words, namely: Storage, distribution, and guidance.

When using this method for drainage design, designers should pay attention to controlling the slope of the ground, not to make it too steep, and to use terrain interception and tissue drainage. In the past process of selling finished drainage ditch, the design of the project successfully utilized the advantages of our finished gutter system impervious to water, and achieved “storage” of water, which is because in addition to drainage in the landscaping, necessary watering irrigation It is also indispensable. The design uses our finished trenches and plunge wells as a water storage system. It can be used for irrigation. You may wish to refer to it.

Based on the above considerations, we have the following three recommendations:
1. Make full use of the slope of the ground controlled by the regulation, and arrange the side ditch and the cross-ditch.
2. According to the characteristics of the finished product drainage ditch, such as impervious to water, quick assembly, etc., combined with the actual situation of the project, make the best use of it.
3, due to the easy loss of green land sediment, in the finished drainage system, try to match the drop well to facilitate dredging.


chinagardendecoration drainage ,ditch ,water ,finished ,design ,should ,drainage ditch ,finished drainage ,finished product ,surface water منبع

مشخصات

تبلیغات

آخرین ارسال ها

آخرین جستجو ها

شعر و داستان هاي كودكانه محبوب فان چت | آدرس اصلی محبوب فان آلفا 3 لوازم برقی خانه دانش نامه چهارباغ شرکت نظافتی رسام پاک عشق من حدیث خانم نوای طرب